Garbage trucks are usually mainly used for municipal sanitation, large factories, and mines. They are used to transport all kinds of garbage. They are suitable for the transportation of residential garbage. They can compress and crush the loaded garbage to increase the density, reduce the volume, and greatly improve Improve the efficiency of garbage collection and transportation. The new garbage truck has the characteristics of reliable quality, low failure rate, convenient maintenance, and low operating cost.
1. Garbage truck circuit maintenance:
The circuit is divided into ten major systems. When a car is driving, a variety of electronic devices are used at the same time, and the engine power is scattered (air conditioning, audio, lighting, power windows, etc.), commonly known as "electricity grab", which easily causes each sensor to send and receive signals on time. Maintenance of the car’s electrical system is very important. Originally, the battery was used to supplement the electrical energy, but the battery’s discharge speed could not keep up. The battery’s power supply stability to the engine, the ignition efficiency of the spark plug, the conductivity of the ignition wire, and the balance of positive and negative voltages, all have a great influence on engine power. For this reason, we can reduce the electrical load, increase the ignition energy, increase the flame propagation speed and shorten the flame propagation distance by replacing the ignition wire, spark plugs, and installing auxiliary facilities such as the current balance device of the automobile power protector, so that the engine can burn better. Reduce carbon deposits and reduce exhaust emissions.
2. Oil circuit maintenance of garbage truck:
Gasoline is atomized through the fuel injector and enters the engine cylinder, and the degree of atomization of the gasoline determines the mixing effect between it and the air. Therefore, the better the gasoline atomization is, the better it is to mix with air and burn fully. Among the many modification methods for the oil circuit, installing a physical fuel supercharger is an effective method to increase the gasoline flow rate and the fuel injection is more refined. The latest use of rare element energy rubber ring, after being heated by the engine, it releases far infrared rays to decompose the collected fuel molecule clusters into individual molecules, and the gasoline atomization effect of the fuel injector is better.
3. Garbage truck gas circuit maintenance:
Increasing the amount of air entering the cylinder of the engine per unit time and reducing the resistance of the engine's air intake is the goal of improving the intake of the engine. The usual method is to replace the original high-flow style, in addition, to install a wind explosion sticker, placed in the air intake box, through its own energy release, decomposes the incoming air clusters to produce a large amount of negative ion air, and the original chaotic and disorderly movement of air molecules becomes a neatly arranged linear movement, allowing the engine to reach a state of lean-burn, making the engine speed climb faster and more powerful.
