The cleanliness of the engine compartment of a sewage suction truck is not only related to the cleanliness and dignity of the vehicle but also related to safety. The first is that as the engine runs all year round, the sludge generated by the steam of various oils cannot be avoided. The sludge is mixed with dust and dirt and becomes one of the hidden dangers of automobile spontaneous combustion. Secondly, a large amount of dust is combined with humid air, it will adhere to the parts and pipelines in a muddy state, speeding up the aging and damage of the parts. Finally, some dirty engine compartments are more likely to become nests for wild mice and small reptiles, so the engine compartment cleaning is imperative.
In fact, cleaning the engine compartment of a sewage suction truck is not so difficult, but one must avoid a taboo, that is, to use a high-pressure water gun, because most of the engine compartment connectors and seals of the models on sale are not completely waterproof. It is also not resistant to the impact of the high-pressure water gun. Even if it is a waterproof engine compartment, car owners should not try it lightly. The high-pressure water gun may cause these parts to rupture and water.
At first, you need to find the following daily necessities:
- A soft-bristled brush. Choosing a small brush as much as possible, because only small brushes can clean roughly in many gaps;
- A few towels, ordinary towels are fine, car wash towels are better;
- One bucket;
- Several plastic bags for water isolation. You can also use the refrigerator cling film instead.
- Foam cleaning agents and surface polishing agents
Then, just follow the steps:
Step 1: Stop the sewage suction truck in a ventilated place and start preparations.
Step 2: Remove all dust and spray with the foam cleaning agent.
Step 3: Start the car and scrub with a damp cloth.
Step 4: Polishing and waxing.
